Angular Contact Ball Bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
Angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- Toyana 7000 A-UO angular contact ball bearings
- 1640 kN
- 100 mm
- 15 mm x 35 mm x 11 mm SNR 7202CG1UJ74 angular contact ball bearings
- 6 mm
- 31000 r/min
- 95 mm x 200 mm x 45 mm NACHI 7319DB angular contact ball bearings
- 3.5 mm
- 47,625 mm
- ISO 71901 CDT angular contact ball bearings
- 3.5 mm
- 47,625 mm
- 55 mm x 100 mm x 21 mm ISB 7211 B angular contact ball bearings
- 75,000 mm
- 130,000 mm
- Toyana 7312AM angular contact ball bearings
- 6 mm
- 31000 r/min
- ISO 71904 CDB angular contact ball bearings
- 140 mm
- 33 mm