Bearing import and Export Co., Ltd

Angular Contact Ball Bearings

Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.

Angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

70 mm x 125 mm x 24 mm Timken 7214WN angular contact ball bearings: d : 75,000 mm; D : 130,000 mm

65 mm x 120 mm x 23 mm FAG 7213-B-TVP angular contact ball bearings: Precision class : P0; Static load, C0 : 34.5 kN

130 mm x 200 mm x 33 mm SKF 7026 ACD/HCP4A angular contact ball bearings: Precision class : P0; Static load, C0 : 34.5 kN

63,500 mm x 79,375 mm x 15,876 mm NTN KYB025DB angular contact ball bearings: B : 6 mm; (Grease) Lubrication Speed : 31000 r/min

120 mm x 260 mm x 86 mm ISB QJ 2324 N2 angular contact ball bearings: Cr : 1760 N / Dynamic loa; da : 15,5 mm / Tolerance:

70 mm x 110 mm x 18 mm SKF BTM 70 BTN9/HCP4CDB angular contact ball bearings: Basic static load rating (C0) : 1640 kN; B : 100 mm

170 mm x 360 mm x 72 mm NKE QJ334-N2-MPA angular contact ball bearings: Basic static load rating (C0) : 1640 kN; B : 100 mm

60 mm x 130 mm x 53,98 mm Timken 5312W angular contact ball bearings: Cr : 1760 N / Dynamic loa; da : 15,5 mm / Tolerance:

76,2 mm x 88,9 mm x 6,35 mm KOYO KAA030 angular contact ball bearings: Ca min : 5 mm; Bore Diameter (mm) : 50

60 mm x 130 mm x 31 mm CYSD 7312CDT angular contact ball bearings: Snap Ring : No; B : 24 mm

12 mm x 32 mm x 10 mm FAG 7201-B-2RS-TVP angular contact ball bearings: B : 6 mm; (Grease) Lubrication Speed : 31000 r/min

75 mm x 105 mm x 16 mm NSK 75BNR19X angular contact ball bearings: B : 6 mm; (Grease) Lubrication Speed : 31000 r/min