Bearing import and Export Co., Ltd

Self Aligning Ball Bearings

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

70 mm x 150 mm x 35 mm NKE 1314 self aligning ball bearings: Size (mm) : 120x55x29; Basic static load rating - C0 : 143 kN

80 mm x 140 mm x 26 mm ISB 1216 K self aligning ball bearings: Weight : 0,0072 Kg; Ew : 22 mm

30 mm x 62 mm x 20 mm FAG 2206-K-TVH-C3 self aligning ball bearings: Size (mm) : 120x55x29; Basic static load rating - C0 : 143 kN

55 mm x 120 mm x 29 mm ISO 1311K self aligning ball bearings: Housing Material : Cast Iron; Cartridge Pilot Diameter : 0 Inch | 0 Millimete

Toyana 1318K self aligning ball bearings: Width (mm) : 29; d : 45 mm

75 mm x 160 mm x 55 mm KOYO 2315 self aligning ball bearings: Width (mm) : 29; d : 45 mm

75 mm x 160 mm x 37 mm NACHI 1315 self aligning ball bearings: d : 170 mm; F : 205 mm

40 mm x 80 mm x 18 mm SKF 1208EKTN9 self aligning ball bearings: C0r : 18800 N / Static loa; m : 28,4 g / Weight

70 mm x 170 mm x 58 mm SKF 2316 K + H 2316 self aligning ball bearings: rs (min) : 3 mm; Static (Cor) : 11.1 mm

AST 2204 self aligning ball bearings: C0r : 18800 N / Static loa; m : 28,4 g / Weight

90 mm x 160 mm x 40 mm NTN 2218SK self aligning ball bearings: d : 170 mm; F : 205 mm

30 mm x 62 mm x 20 mm SKF 2206E-2RS1TN9 self aligning ball bearings: Housing Material : Cast Iron; Cartridge Pilot Diameter : 0 Inch | 0 Millimete