NSK 6001du Bearing

Self Aligning Ball Bearings

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

Toyana 1305 self aligning ball bearings: C0r : 18800 N / Static loa; m : 28,4 g / Weight

95 mm x 200 mm x 45 mm NKE 1319-K+H319 self aligning ball bearings

95 mm x 200 mm x 45 mm NKE 1319-K+H319 self aligning ball bearings: rs (min) : 3 mm; Static (Cor) : 11.1 mm

Toyana 11209 self aligning ball bearings

Toyana 11209 self aligning ball bearings: Width (mm) : 29; d : 45 mm

17 mm x 47 mm x 19 mm NACHI 2303 self aligning ball bearings

17 mm x 47 mm x 19 mm NACHI 2303 self aligning ball bearings: C0r : 18800 N / Static loa; m : 28,4 g / Weight

30 mm x 72 mm x 19 mm NTN 1306SK self aligning ball bearings

30 mm x 72 mm x 19 mm NTN 1306SK self aligning ball bearings: d : 170 mm; F : 205 mm

55 mm x 140 mm x 33 mm SIGMA 10411 self aligning ball bearings

55 mm x 140 mm x 33 mm SIGMA 10411 self aligning ball bearings: Housing Material : Cast Iron; Cartridge Pilot Diameter : 0 Inch | 0 Millimete

70 mm x 125 mm x 24 mm NKE 1214-K+H214 self aligning ball bearings

70 mm x 125 mm x 24 mm NKE 1214-K+H214 self aligning ball bearings: A1 : 14 mm; Bolt (G) : M14

Toyana 11206 self aligning ball bearings

Toyana 11206 self aligning ball bearings: C0r : 18800 N / Static loa; m : 28,4 g / Weight

20 mm x 52 mm x 21 mm KOYO 2304K self aligning ball bearings

20 mm x 52 mm x 21 mm KOYO 2304K self aligning ball bearings: Width (mm) : 29; d : 45 mm

25 mm x 62 mm x 24 mm FAG 2305-TVH self aligning ball bearings

25 mm x 62 mm x 24 mm FAG 2305-TVH self aligning ball bearings: C0r : 18800 N / Static loa; m : 28,4 g / Weight

90 mm x 160 mm x 30 mm ISB 1218 K self aligning ball bearings

90 mm x 160 mm x 30 mm ISB 1218 K self aligning ball bearings: Width (mm) : 29; d : 45 mm

15 mm x 35 mm x 14 mm ISB 2202-2RSTN9 self aligning ball bearings

15 mm x 35 mm x 14 mm ISB 2202-2RSTN9 self aligning ball bearings: Weight : 0,0072 Kg; Ew : 22 mm