NSK 6001du Bearing

Self Aligning Ball Bearings

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

110 mm x 240 mm x 80 mm NSK 2322 K self aligning ball bearings: Width (mm) : 29; d : 45 mm

85 mm x 150 mm x 36 mm FAG 2217-K-M-C3 self aligning ball bearings

85 mm x 150 mm x 36 mm FAG 2217-K-M-C3 self aligning ball bearings: rs (min) : 3 mm; Static (Cor) : 11.1 mm

35 mm x 80 mm x 21 mm ISO 1307K+H307 self aligning ball bearings

35 mm x 80 mm x 21 mm ISO 1307K+H307 self aligning ball bearings: Da max : 290 mm; da min : 230 mm

25 mm x 62 mm x 24 mm FAG 2305-K-TVH-C3 + H2305 self aligning ball bearings

25 mm x 62 mm x 24 mm FAG 2305-K-TVH-C3 + H2305 self aligning ball bearings: Da max : 290 mm; da min : 230 mm

Toyana 1312 self aligning ball bearings: Housing Material : Cast Iron; Cartridge Pilot Diameter : 0 Inch | 0 Millimete

55 mm x 100 mm x 21 mm FBJ 1211K self aligning ball bearings

55 mm x 100 mm x 21 mm FBJ 1211K self aligning ball bearings: Ew : 624 mm; Mass (without HJ ring) : 120 kg

55 mm x 100 mm x 25 mm NTN 2211SK self aligning ball bearings

55 mm x 100 mm x 25 mm NTN 2211SK self aligning ball bearings: Size (mm) : 120x55x29; Basic static load rating - C0 : 143 kN

Toyana 2310 self aligning ball bearings: Ew : 624 mm; Mass (without HJ ring) : 120 kg

20 mm x 47 mm x 14 mm ISO 1204 self aligning ball bearings

20 mm x 47 mm x 14 mm ISO 1204 self aligning ball bearings: Da max : 290 mm; da min : 230 mm

35 mm x 80 mm x 31 mm NKE 2307-2RS self aligning ball bearings

35 mm x 80 mm x 31 mm NKE 2307-2RS self aligning ball bearings: rs (min) : 3 mm; Static (Cor) : 11.1 mm

Toyana 1316 self aligning ball bearings: Size (mm) : 120x55x29; Basic static load rating - C0 : 143 kN

65 mm x 120 mm x 23 mm ISB 1213 KTN9 self aligning ball bearings

65 mm x 120 mm x 23 mm ISB 1213 KTN9 self aligning ball bearings: A1 : 14 mm; Bolt (G) : M14