Bearing import and Export Co., Ltd

Self Aligning Ball Bearings

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

AST 2305 self aligning ball bearings
0,0072 Kg
22 mm
45 mm x 85 mm x 23 mm NSK 2209 self aligning ball bearings
624 mm
120 kg
100 mm x 180 mm x 34 mm NACHI 1220 self aligning ball bearings
120x55x29
143 kN
75 mm x 130 mm x 25 mm NKE 1215-K self aligning ball bearings
120x55x29
143 kN
25 mm x 52 mm x 18 mm ZEN 2205 self aligning ball bearings
624 mm
120 kg
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Angular Contact Ball Bearings
Bearing Units
Cylindrical Roller Bearings
Deep Groove Ball Bearings
Needle Roller Bearings
Plain Bearings
Self Aligning Ball Bearings
Spherical Roller Bearings
Tapered Roller Bearings
Thrust Ball Bearings
Thrust Roller Bearings
Wheel Bearings
6204 Bearing
lm11949 Bearing
6304 Bearing
ucf 204 Bearing
Timken Tapered Roller Bearings