Self Aligning Ball Bearings
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.
- 40 mm x 90 mm x 33 mm ISO 2308 self aligning ball bearings
- 0,0072 Kg
- 22 mm
- 110 mm x 200 mm x 53 mm KOYO 2222-2RS self aligning ball bearings
- 120x55x29
- 143 kN
- 110 mm x 200 mm x 53 mm KOYO 2222 self aligning ball bearings
- 0,0072 Kg
- 22 mm
- Toyana 2311K+H2311 self aligning ball bearings
- 18800 N / Static loa
- 28,4 g / Weight
- Toyana 1309K+H309 self aligning ball bearings
- Cast Iron
- 0 Inch | 0 Millimete
- 45 mm x 85 mm x 23 mm FBJ 2209 self aligning ball bearings
- Cast Iron
- 0 Inch | 0 Millimete
- 50 mm x 90 mm x 20 mm NACHI 1210 self aligning ball bearings
- 0,0072 Kg
- 22 mm
- 80 mm x 140 mm x 33 mm NKE 2216-K self aligning ball bearings
- 120x55x29
- 143 kN
