Self Aligning Ball Bearings
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.
- ISB TSM 22 BB-O self aligning ball bearings
- 170 mm
- 205 mm
- 80 mm x 140 mm x 33 mm NKE 2216 self aligning ball bearings
- Cast Iron
- 0 Inch | 0 Millimete
- 45 mm x 100 mm x 36 mm KOYO 2309 self aligning ball bearings
- 0,0072 Kg
- 22 mm
- 9 mm x 26 mm x 8 mm ISO 129 self aligning ball bearings
- 0,0072 Kg
- 22 mm
- 90 mm x 160 mm x 30 mm ISO 1218 self aligning ball bearings
- 18800 N / Static loa
- 28,4 g / Weight
- Toyana 1210 self aligning ball bearings
- 624 mm
- 120 kg
