Self Aligning Ball Bearings
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.
- 40 mm x 80 mm x 18 mm SKF 1208ETN9 self aligning ball bearings
- 120x55x29
- 143 kN
- 30 mm x 72 mm x 27 mm ISO 2306K self aligning ball bearings
- 0,0072 Kg
- 22 mm
- 50 mm x 90 mm x 20 mm KOYO 1210 self aligning ball bearings
- Cast Iron
- 0 Inch | 0 Millimete
- ISB TSF 50 BB self aligning ball bearings
- 0,0072 Kg
- 22 mm
- 80 mm x 170 mm x 58 mm NSK 2316 self aligning ball bearings
- 18800 N / Static loa
- 28,4 g / Weight
- 30 mm x 62 mm x 16 mm ISO 1206 self aligning ball bearings
- 0,0072 Kg
- 22 mm
